Verifierad leverantör

BMR 16-17 6th Gen Camaro Rear Cradle Lockout Bushing Kit - Black - BK063

SKU: BMRBK063 MPN: BK063

Pris:
Försäljningspris€322.99

Inklusive skatt Frakt beräknas i kassan

Stock:
10-12 dagars leveranstid

Beskrivning

Reduce Wheelhop, bushing deflection, and cradle movement on your 2016-newer Chevrolet Camaro with a Cradle Bushing Lockout Kit from BMR Suspension. Built from CNC-machines Delrin, laser-cut stainless steel, and billet aluminum, BMR?s BK063 Cradle Bushing Lockout Kit is designed to greatly reduce cradle bushing deflection, which is one of the biggest causes of wheelhop. BMR?s BK063?s Delrin upper bushing inserts are CNC-machined and specifically designed to fill the voids in the factory bushings (front and rear). The additional hollow space is filled with CNC-aluminum ?bullet? inserts. The kit is finished with laser-cut stainless steel washers that capture the lower Delrin inserts and prevent up and down movement. By filling the voids in the bushings, deflection is greatly reduced, allowing more power and torque to be transferred to the ground instead of being absorbed by the chassis. BMR Suspension designed the BK063 Cradle Bushing Lockout Kit for street performance, drag race, and handling applications. This 100% bolt-on kit use existing boltholes and hardware, allowing for easy installation with simple hand tools. Once installed, the Cradle Bushing Lockout Kit minimized bushing and cradle deflection with nearly no change in NVH. (During BMR?s testing, no change in NVH was observed without accompanying modifications.) BMR Suspension?s BK063 Cradle Bushing Lockout Kit is the only part you need to affordably and effectively lessen wheelhop, bushing deflection, and cradle movement. Throughout testing, BMR has seen about an 80%-90% reduction in fore/aft and lateral cradle bushing deflection. A car with no other mods and stock tires that isn?t driven overly hard is going to see a 90% or higher reduction, while a more race oriented Camaros with sticky tires will see slightly less of a reduction. Launching the test vehicle at over 7,000 rpm on drag radials, BMR saw about an 80% reduction in bushing deflection.
Application Guide


This Part Fits:

Year Make Model Submodel
2017-2020 Chevrolet Camaro LS
2016-2020 Chevrolet Camaro LT
2020 Chevrolet Camaro LT1
2016-2020 Chevrolet Camaro SS
2017-2020 Chevrolet Camaro ZL1

Kundrecensioner

D. Olthof
Verifierad

Utmärkt service

Efterlyst en del som inte fanns i sortimentet, men som fanns hos en av deras samarbetspartners. Produkten gick att beställa utan problem och levererades snabbt. Mycket trevlig kommunikation, tack!

Feb 25, 2024
Edo N.
Verifierad

Har saker som normalt måste genomgå import

Hade delarna som jag egentligen bara kunde hitta någon annanstans på internet via en besvärlig importkampanj från antingen Storbritannien eller USA. Tuningsupply hade dem på hemsidan, till ett bra pris och de levererades dessutom snabbt. Så bra service!

Aug 21, 2024
Peter B
Verifierad

Så billigt! Det var verkligen en chansning först....

Så billigt!!! Först var det verkligen en chansning för mig att beställa mina fälgar från Tuningsupply eftersom de var så mycket billigare än någon annanstans. Och visst, den nionde dagen kom DPD till dörren med mina fälgar. Verkligen totalt 360 euro billigare!!!! För mig en mycket stor applåd för detta företag.

May 7, 2024

Leverans med track & trace över hela Europa

Inga importtullar eller dolda avgifter

Bäst rankade leverantör i EU

Du kanske också gillar

Nyligen visad