Tarkistettu toimittaja

BMR 16-17 6th Gen Camaro Rear Cradle Lockout Bushing Kit - Black - BK063

SKU: BMRBK063 MPN: BK063

Hinta:
Myyntihinta€322.99

Sisältää veron Toimitus lasketaan kassalla

Varasto:
Toimitusaika 10-12 päivää

Kuvaus

Reduce Wheelhop, bushing deflection, and cradle movement on your 2016-newer Chevrolet Camaro with a Cradle Bushing Lockout Kit from BMR Suspension. Built from CNC-machines Delrin, laser-cut stainless steel, and billet aluminum, BMR?s BK063 Cradle Bushing Lockout Kit is designed to greatly reduce cradle bushing deflection, which is one of the biggest causes of wheelhop. BMR?s BK063?s Delrin upper bushing inserts are CNC-machined and specifically designed to fill the voids in the factory bushings (front and rear). The additional hollow space is filled with CNC-aluminum ?bullet? inserts. The kit is finished with laser-cut stainless steel washers that capture the lower Delrin inserts and prevent up and down movement. By filling the voids in the bushings, deflection is greatly reduced, allowing more power and torque to be transferred to the ground instead of being absorbed by the chassis. BMR Suspension designed the BK063 Cradle Bushing Lockout Kit for street performance, drag race, and handling applications. This 100% bolt-on kit use existing boltholes and hardware, allowing for easy installation with simple hand tools. Once installed, the Cradle Bushing Lockout Kit minimized bushing and cradle deflection with nearly no change in NVH. (During BMR?s testing, no change in NVH was observed without accompanying modifications.) BMR Suspension?s BK063 Cradle Bushing Lockout Kit is the only part you need to affordably and effectively lessen wheelhop, bushing deflection, and cradle movement. Throughout testing, BMR has seen about an 80%-90% reduction in fore/aft and lateral cradle bushing deflection. A car with no other mods and stock tires that isn?t driven overly hard is going to see a 90% or higher reduction, while a more race oriented Camaros with sticky tires will see slightly less of a reduction. Launching the test vehicle at over 7,000 rpm on drag radials, BMR saw about an 80% reduction in bushing deflection.
Application Guide


This Part Fits:

Year Make Model Submodel
2017-2020 Chevrolet Camaro LS
2016-2020 Chevrolet Camaro LT
2020 Chevrolet Camaro LT1
2016-2020 Chevrolet Camaro SS
2017-2020 Chevrolet Camaro ZL1

Asiakkaiden arvostelut

D. Olthof
Vahvistettu

Erinomainen palvelu

Pyydettiin osaa, jota ei ollut valikoimassa, mutta joka oli saatavissa yhdeltä heidän yhteistyökumppaniltaan. Tuote voitiin tilata ongelmitta ja se toimitettiin nopeasti. Erittäin mukava viestintä, kiitos!

Feb 25, 2024
Edo N.
Vahvistettu

On asioita, jotka normaalisti on käytävä tuonnin kautta

Oli osia, joita en oikeastaan löytänyt muualta internetistä kuin hankalan tuontitarjouksen kautta joko Yhdistyneestä kuningaskunnasta tai Yhdysvalloista. Tuningsupplyllä oli ne nettisivuillaan, hyvään hintaan ja ne myös toimitettiin nopeasti. Joten hyvää palvelua!

Aug 21, 2024
Peter B
Vahvistettu

Niin halpaa! Se oli todella uhkapeliä aluksi....

Niin halpaa!!! Aluksi oli todella uhkapeliä tilata vanteet Tuningsupplysta, koska ne olivat niin paljon halvempia kuin muualla. Ja totta tosiaan, yhdeksäntenä päivänä DPD saapui ovelle vanteideni kanssa. Todellakin yhteensä 360 euroa halvemmalla!!!!. Minulle erittäin suuret aplodit tälle firmalle.

May 7, 2024

Toimitus seuranta- ja jäljitystoiminnolla kaikkialla Euroopassa

Ei tuontitulleja tai piilotettuja maksuja

EU:n parhaaksi arvioitu toimittaja

Saatat myös pitää

Äskettäin katsottu