Verifierad leverantör

BMR 82-02 3rd Gen F-Body Rear Hollow 25mm Sway Bar Kit w/ Bushings - Red - SB003R

SKU: BMRSB003R MPN: SB003R

Pris:
Försäljningspris€353.99

Inklusive skatt Frakt beräknas i kassan

Stock:
10-12 dagars leveranstid

Beskrivning

The two primary functions of sway bars are to control body roll and to determine the understeer or oversteer behavior of a vehicle. Stock sway bars have low torsional spring rates because they are manufactured from small diameter bar stock or tubing. BMR Suspensions SB003 rear sway bar was designed by factoring in the vehicle weight, application, motion ratio, coil spring rate, and adjustability requirements. Manufactured from heavy-wall 25mm DOM tubing, the SB003 is cold formed to better resist torsional fatigue and retain its "memory" far longer than the hot-formed bars used by many competitors. The sway bar is CNC-formed for exact manufacturing tolerances and repeatable high quality. The SB003 attaches to your Camaro with 88-durometer polyurethane bushings, reducing the deflection from the stock rubber bushings. These bushings are molded from 88-durometer, low-deflection, polyurethane, and are internally fluted to keeps grease in the bushing. The fabricated laser cut, TIG-welded steel sway bar end links are reinforced to minimize deflection.BMR Suspension designed the SB003 sway bar for street performance, drag race, autocross, and road race applications. The SB003 gives you a 149% increase in rate over the stock bar (depending on year and model). These rate increases allow you to fine-tune the handling characteristics of the suspension so you can drive harder through corners with minimal body roll. The hollow design allows for loads of strength without adding a lot of weight. This allows for more sway bar control, which equals better handling. When performance is a must, rely on BMR Suspension!BMR Suspensions SB003 sway bars are available in black hammertone and red powdercoat for long-lasting good looks. Installation time is about 1-2 hours. Proudly made in the U.S.A.!All kits come with polyurethane mounting bushings and endlink kits.
Application Guide


This Part Fits:

Year Make Model Submodel
1988,1993-2002 Chevrolet Camaro Base
1982-1986 Chevrolet Camaro Berlinetta
1993 Chevrolet Camaro Indianapolis 500 Pace Car
1985-1990 Chevrolet Camaro Iroc-Z
1987 Chevrolet Camaro LT
1989-1992,1996-1997 Chevrolet Camaro RS
1992 Chevrolet Camaro RS Heritage Edition
1982-1987 Chevrolet Camaro Sport
1982-1987,1991-2002 Chevrolet Camaro Z28
1992 Chevrolet Camaro Z28 Heritage Edition
1982 Chevrolet Camaro Z28 Indianapolis 500 Pace Car
1998-2002 Chevrolet Camaro Z28 SS
1982-2002 Pontiac Firebird Base
1989-2002 Pontiac Firebird Formula
1982-1986 Pontiac Firebird S/E
1982-2002 Pontiac Firebird Trans Am
1994 Pontiac Firebird Trans Am GT
1989-1992 Pontiac Firebird Trans Am GTA
1989 Pontiac Firebird Trans Am GTA SE

Kundrecensioner

D. Olthof
Verifierad

Utmärkt service

Efterlyst en del som inte fanns i sortimentet, men som fanns hos en av deras samarbetspartners. Produkten gick att beställa utan problem och levererades snabbt. Mycket trevlig kommunikation, tack!

Feb 25, 2024
Edo N.
Verifierad

Har saker som normalt måste genomgå import

Hade delarna som jag egentligen bara kunde hitta någon annanstans på internet via en besvärlig importkampanj från antingen Storbritannien eller USA. Tuningsupply hade dem på hemsidan, till ett bra pris och de levererades dessutom snabbt. Så bra service!

Aug 21, 2024
Peter B
Verifierad

Så billigt! Det var verkligen en chansning först....

Så billigt!!! Först var det verkligen en chansning för mig att beställa mina fälgar från Tuningsupply eftersom de var så mycket billigare än någon annanstans. Och visst, den nionde dagen kom DPD till dörren med mina fälgar. Verkligen totalt 360 euro billigare!!!! För mig en mycket stor applåd för detta företag.

May 7, 2024

Leverans med track & trace över hela Europa

Inga importtullar eller dolda avgifter

Bäst rankade leverantör i EU

Du kanske också gillar

Nyligen visad