BMR 82-02 3rd Gen F-Body Rear Hollow 25mm Sway Bar Kit w/ Bushings - Red - SB003R

SKU: BMRSB003R MPN: SB003R

Only 4 left at supplier

€391.99

Taxes and duties included

Sisältää veron Toimitus lasketaan kassalla

Expected Home Delivery Dec 13 - Dec 20

Toimitus seurannalla koko Euroopassa

Ei tuontitulleja tai piilokuluja

Korkeimmin arvosteltu toimittaja EU:ssa

SKU	BMRSB003R
MPN	SB003R
EAN	887753325778
Certifications	None

The two primary functions of sway bars are to control body roll and to determine the understeer or oversteer behavior of a vehicle. Stock sway bars have low torsional spring rates because they are manufactured from small diameter bar stock or tubing. BMR Suspensions SB003 rear sway bar was designed by factoring in the vehicle weight, application, motion ratio, coil spring rate, and adjustability requirements. Manufactured from heavy-wall 25mm DOM tubing, the SB003 is cold formed to better resist torsional fatigue and retain its "memory" far longer than the hot-formed bars used by many competitors. The sway bar is CNC-formed for exact manufacturing tolerances and repeatable high quality. The SB003 attaches to your Camaro with 88-durometer polyurethane bushings, reducing the deflection from the stock rubber bushings. These bushings are molded from 88-durometer, low-deflection, polyurethane, and are internally fluted to keeps grease in the bushing. The fabricated laser cut, TIG-welded steel sway bar end links are reinforced to minimize deflection. BMR Suspension designed the SB003 sway bar for street performance, drag race, autocross, and road race applications. The SB003 gives you a 149% increase in rate over the stock bar (depending on year and model). These rate increases allow you to fine-tune the handling characteristics of the suspension so you can drive harder through corners with minimal body roll. The hollow design allows for loads of strength without adding a lot of weight. This allows for more sway bar control, which equals better handling. When performance is a must, rely on BMR Suspension! BMR Suspensions SB003 sway bars are available in black hammertone and red powdercoat for long-lasting good looks. Installation time is about 1-2 hours. Proudly made in the U.S.A.! All kits come with polyurethane mounting bushings and endlink kits.
Application Guide

This Part Fits:

Year	Make	Model	Submodel
1988,1993-2002	Chevrolet	Camaro	Base
1982-1986	Chevrolet	Camaro	Berlinetta
1993	Chevrolet	Camaro	Indianapolis 500 Pace Car
1985-1990	Chevrolet	Camaro	Iroc-Z
1987	Chevrolet	Camaro	LT
1989-1992,1996-1997	Chevrolet	Camaro	RS
1992	Chevrolet	Camaro	RS Heritage Edition
1982-1987	Chevrolet	Camaro	Sport
1982-1987,1991-2002	Chevrolet	Camaro	Z28
1992	Chevrolet	Camaro	Z28 Heritage Edition
1982	Chevrolet	Camaro	Z28 Indianapolis 500 Pace Car
1998-2002	Chevrolet	Camaro	Z28 SS
1982-2002	Pontiac	Firebird	Base
1989-2002	Pontiac	Firebird	Formula
1982-1986	Pontiac	Firebird	S/E
1982-2002	Pontiac	Firebird	Trans Am
1994	Pontiac	Firebird	Trans Am GT
1989-1992	Pontiac	Firebird	Trans Am GTA
1989	Pontiac	Firebird	Trans Am GTA SE

D. Olthof

Vahvistettu

Excellent service

Called for a part that was not in the assortment, but was available from one of their partners. Product could be ordered without difficulty and was delivered quickly. Very nice communication, thank you!

Feb 25, 2024

Edo N.

Vahvistettu

Has things that normally have to go through import

Had the parts that I could really only find elsewhere on the internet via an awkward import promotion from either the UK or the US. Tuningsupply had them on the website, at a good price and they were also delivered quickly. So good service!

Aug 21, 2024

Peter B

Vahvistettu

So cheap! It was really a gamble at first....

So cheap!!! At first it was really a gamble for me to order my rims from Tuningsupply because they were so very much cheaper than elsewhere. And sure enough, on the ninth day DPD arrived at the door with my rims. Really a total of 360 euros cheaper!!!! For me a very big applause for this company.

May 7, 2024