Fornecedor verificado

BMR 05-10 S197 Mustang Rear Solid 22mm Sway Bar Kit w/ Bushings & Billet Links - Red - SB023R

SKU: BMRSB023R MPN: SB023R

Preço:
Preço de venda€435.99

Imposto incluído Envio calculado no checkout

Estoque:
Prazo de entrega de 10 a 12 dias

Descrição

The two primary functions of sway bars are to control body roll and to determine the understeer or oversteer behavior of a vehicle. Stock sway bars have low torsional spring rates because they are manufactured from small diameter bar stock or tubing. BMR Suspensions SB023 rear sway bar was designed by factoring in the vehicle weight, application, motion ratio, coil spring rate, and adjustability requirements. Manufactured from heavy-duty 22mm bar stock, the SB023 is cold formed to better resist torsional fatigue and retain its "memory" far longer than the hot-formed bars used by many competitors. The sway bar is CNC-formed for exact manufacturing tolerances and repeatable high quality. The SB023 attaches to your Mustang with billet aluminum end links and 88-durometer polyurethane bushings, reducing the deflection from the stock rubber bushings. These bushings are molded from 88-durometer, low-deflection, polyurethane, and are internally fluted to keep grease in the bushing. The CNC-machined, billet aluminum sway bar end links eliminate deflection.BMR Suspension designed the SB023 sway bar for street performance, autocross, and road race applications. The non-adjustable SB023 gives you a 52% increase in rate over the stock bar (depending on year and model). The rate increases gives you improved handling characteristics so you can drive harder through corners with minimal body roll. This allows for more sway bar control, which equals better handling. When performance is a must, rely on BMR Suspension!BMR Suspensions SB023 sway bars are available in black hammertone and red powdercoat for long-lasting good looks. Installation time is about 1-2 hours. Proudly made in the U.S.A.!NOTE: BMR SB023 rear sway bar is not compatible with convertible models unless the additional OE convertible bracing is removed.
Application Guide


This Part Fits:

Year Make Model Submodel
2005-2014 Ford Mustang Base
2012-2013 Ford Mustang Boss 302
2008-2009 Ford Mustang Bullitt
2005-2014 Ford Mustang GT
2007-2008 Ford Mustang Shelby GT
2007-2014 Ford Mustang Shelby GT500
2008-2009 Ford Mustang Shelby GT500KR

Comentários de clientes

D. Olthof
Verificado

Excelente serviço

Pedi uma peça que não estava no sortido, mas que estava disponível num dos seus parceiros. O produto pode ser encomendado sem dificuldade e foi entregue rapidamente. Muito boa comunicação, obrigado!

Feb 25, 2024
Edo N.
Verificado

Tem coisas que normalmente têm de passar pela importação

Tinha as peças que, na verdade, só podia encontrar noutro local na Internet através de uma promoção de importação estranha do Reino Unido ou dos EUA. A Tuningsupply tinha-as no seu sítio Web, a um bom preço e foram entregues rapidamente. Portanto, um bom serviço!

Aug 21, 2024
Peter B
Verificado

Tão barato! Foi realmente uma aposta no início....

Tão baratas!!! No início, foi realmente uma aposta para mim encomendar as minhas jantes à Tuningsupply porque eram muito mais baratas do que noutros sítios. E, sem dúvida, no nono dia, o DPD chegou à minha porta com as minhas jantes. Realmente um total de 360 euros mais barato!!!! Para mim, um grande aplauso para esta empresa.

May 7, 2024

Envio com track & trace para toda a Europa

Sem direitos de importação ou taxas ocultas

Fornecedor com a melhor classificação na UE

Também pode gostar

Visto recentemente