Tarkistettu toimittaja

BMR 05-10 S197 Mustang Rear Solid 22mm Sway Bar Kit w/ Bushings & Billet Links - Red - SB023R

SKU: BMRSB023R MPN: SB023R

Hinta:
Myyntihinta€435.99

Sisältää veron Toimitus lasketaan kassalla

Varasto:
Toimitusaika 10-12 päivää

Kuvaus

The two primary functions of sway bars are to control body roll and to determine the understeer or oversteer behavior of a vehicle. Stock sway bars have low torsional spring rates because they are manufactured from small diameter bar stock or tubing. BMR Suspensions SB023 rear sway bar was designed by factoring in the vehicle weight, application, motion ratio, coil spring rate, and adjustability requirements. Manufactured from heavy-duty 22mm bar stock, the SB023 is cold formed to better resist torsional fatigue and retain its "memory" far longer than the hot-formed bars used by many competitors. The sway bar is CNC-formed for exact manufacturing tolerances and repeatable high quality. The SB023 attaches to your Mustang with billet aluminum end links and 88-durometer polyurethane bushings, reducing the deflection from the stock rubber bushings. These bushings are molded from 88-durometer, low-deflection, polyurethane, and are internally fluted to keep grease in the bushing. The CNC-machined, billet aluminum sway bar end links eliminate deflection.BMR Suspension designed the SB023 sway bar for street performance, autocross, and road race applications. The non-adjustable SB023 gives you a 52% increase in rate over the stock bar (depending on year and model). The rate increases gives you improved handling characteristics so you can drive harder through corners with minimal body roll. This allows for more sway bar control, which equals better handling. When performance is a must, rely on BMR Suspension!BMR Suspensions SB023 sway bars are available in black hammertone and red powdercoat for long-lasting good looks. Installation time is about 1-2 hours. Proudly made in the U.S.A.!NOTE: BMR SB023 rear sway bar is not compatible with convertible models unless the additional OE convertible bracing is removed.
Application Guide


This Part Fits:

Year Make Model Submodel
2005-2014 Ford Mustang Base
2012-2013 Ford Mustang Boss 302
2008-2009 Ford Mustang Bullitt
2005-2014 Ford Mustang GT
2007-2008 Ford Mustang Shelby GT
2007-2014 Ford Mustang Shelby GT500
2008-2009 Ford Mustang Shelby GT500KR

Asiakkaiden arvostelut

D. Olthof
Vahvistettu

Erinomainen palvelu

Pyydettiin osaa, jota ei ollut valikoimassa, mutta joka oli saatavissa yhdeltä heidän yhteistyökumppaniltaan. Tuote voitiin tilata ongelmitta ja se toimitettiin nopeasti. Erittäin mukava viestintä, kiitos!

Feb 25, 2024
Edo N.
Vahvistettu

On asioita, jotka normaalisti on käytävä tuonnin kautta

Oli osia, joita en oikeastaan löytänyt muualta internetistä kuin hankalan tuontitarjouksen kautta joko Yhdistyneestä kuningaskunnasta tai Yhdysvalloista. Tuningsupplyllä oli ne nettisivuillaan, hyvään hintaan ja ne myös toimitettiin nopeasti. Joten hyvää palvelua!

Aug 21, 2024
Peter B
Vahvistettu

Niin halpaa! Se oli todella uhkapeliä aluksi....

Niin halpaa!!! Aluksi oli todella uhkapeliä tilata vanteet Tuningsupplysta, koska ne olivat niin paljon halvempia kuin muualla. Ja totta tosiaan, yhdeksäntenä päivänä DPD saapui ovelle vanteideni kanssa. Todellakin yhteensä 360 euroa halvemmalla!!!!. Minulle erittäin suuret aplodit tälle firmalle.

May 7, 2024

Toimitus seuranta- ja jäljitystoiminnolla kaikkialla Euroopassa

Ei tuontitulleja tai piilotettuja maksuja

EU:n parhaaksi arvioitu toimittaja

Saatat myös pitää

Äskettäin katsottu