Tarkistettu toimittaja

Skunk2 Honda/Acura EG/DC Ultra Series Rear Lower Control Arm Set - Black - 542-05-2195

SKU: SKK542-05-2195 MPN: 542-05-2195

Hinta:
Myyntihinta€383.99

Sisältää veron Toimitus lasketaan kassalla

Varasto:
Toimitusaika 10-12 päivää

Kuvaus

Skunk2 has done it again. While others are busy imitating our LCA's, Skunk2 engineers have spent years of extensive R & D to revolutionize a product that was once thought to be dialed in. Skunk2 is proud to announce the release of its Ultra Series Lower Control Arms for the '88-'95 Civic/ CRX and '90-'01 Integra. The Ultra Series LCA's are based off of the same technology the company's been using in its own race cars for 20 years. Skunk2's Rear Lower Control Arms are direct replacements, maintain OEM suspension geometry, and are ideal for street and race applications. The Ultra Series Lower Control Arm offers the hardcore racer and discerning enthusiast, the very best of the best. In a market full of 'Me Too' Product, and recycled, annealed lower control arms, we took the Lower Control Arm back to the drawing board. Often not used due to the higher cost, we chose 7075-T6 because of its exceptional strength to weight ratio and fatigue strength. With an ultimate tensile strength of over 78,000 PSI, and fatigue strength of 23,000 psi for 500 million cycles – This is the perfect material for our game changing Ultra LCA's. The result of our hard work is a 7075-T6 Forged Aluminum LCA, that is 19% lighter and 27% stronger than our previous generation of LCA's. Accurate suspension geometry is maintained under the most aggressive driving conditions using high load steel spherical bearings on the trailing arm side and tuned durometer elastomeric bushings for the sub frame side of the LCA. Delrin bushings are utilized at the shock mounting position for their low friction and minimal deflection for unparalleled dynamic shock control. Using this select combination of bushings allows the most comfort and control under any driving conditions. For hardcore race level handling, we have also added the option to replace the sub frame side elastomeric bushing with a high load steel spherical bushing for a no-nonsense track car. The bushing change can be done in minutes with basic tools

This Part Fits:

Year Make Model Submodel
1990-1993,1997-2001 Acura Integra GS
1992-2001 Acura Integra GS-R
1990-2001 Acura Integra LS
1990-1998 Acura Integra RS
1988-1991 Honda Civic Base
1992-1995 Honda Civic CX
1988-1995 Honda Civic DX
1990-1995 Honda Civic EX
1988-1995 Honda Civic LX
1989-1995 Honda Civic Si
1992-1995 Honda Civic VX
1993-1997 Honda Civic del Sol S
1993-1997 Honda Civic del Sol Si
1994-1997 Honda Civic del Sol VTEC
1988 Honda CRX DX
1988-1991 Honda CRX HF
1988-1991 Honda CRX Si

Asiakkaiden arvostelut

D. Olthof
Vahvistettu

Erinomainen palvelu

Pyydettiin osaa, jota ei ollut valikoimassa, mutta joka oli saatavissa yhdeltä heidän yhteistyökumppaniltaan. Tuote voitiin tilata ongelmitta ja se toimitettiin nopeasti. Erittäin mukava viestintä, kiitos!

Feb 25, 2024
Edo N.
Vahvistettu

On asioita, jotka normaalisti on käytävä tuonnin kautta

Oli osia, joita en oikeastaan löytänyt muualta internetistä kuin hankalan tuontitarjouksen kautta joko Yhdistyneestä kuningaskunnasta tai Yhdysvalloista. Tuningsupplyllä oli ne nettisivuillaan, hyvään hintaan ja ne myös toimitettiin nopeasti. Joten hyvää palvelua!

Aug 21, 2024
Peter B
Vahvistettu

Niin halpaa! Se oli todella uhkapeliä aluksi....

Niin halpaa!!! Aluksi oli todella uhkapeliä tilata vanteet Tuningsupplysta, koska ne olivat niin paljon halvempia kuin muualla. Ja totta tosiaan, yhdeksäntenä päivänä DPD saapui ovelle vanteideni kanssa. Todellakin yhteensä 360 euroa halvemmalla!!!!. Minulle erittäin suuret aplodit tälle firmalle.

May 7, 2024

Toimitus seuranta- ja jäljitystoiminnolla kaikkialla Euroopassa

Ei tuontitulleja tai piilotettuja maksuja

EU:n parhaaksi arvioitu toimittaja

Saatat myös pitää

Äskettäin katsottu